Sistem Pendukung Keputusan Pemberian Kredit Koperasi Simpan Pinjam Menggunakan Metode MARCOS dan Rank Order Centroid

Sandi Badiwibowo Atim; Yohanes Eka  Wibawa

doi:10.58602/jima-ilkom.v3i1.22

Sandi Badiwibowo Atim Universitas Lampung
Yohanes Eka Wibawa Universitas Tanri Abeng Jakarta

DOI: https://doi.org/10.58602/jima-ilkom.v3i1.22

Keywords: Decision, Credit, Cooperation, MARCOS method, Rank Order Centroid

Abstract

Savings and loan cooperatives are an economic organization that aims to provide financial support to their members through savings and lending mechanisms. The problem experienced by XYZ savings and loan cooperatives is that no creditworthiness assessment system exists in the cooperative. The credit granting process is carried out by conducting a survey from survey officers through forms, submission requirements, and member business taxation formats to conduct committee meetings. This study aims to apply a decision model in lending to savings and loan cooperative customers by applying the MARCOS method with the centroid rank order weighting method so that the results of applying this method become a decision recommendation for the cooperative in determining credit. The ranking results above show the recommendation for providing the first credit to customer 5 with a final value of 0.89323 getting rank 1, then customer 6 with a final value of 0.82269 getting rank 2, and customer 2 with a final value of 0.78972 getting rank 3.

Downloads

Download data is not yet available.

References

S. H. Hadad, A. L. Kalua, F. Faridi, D. Y. Priyanggodo, and E. Alfonsius, Analisis dan perancangan perangkat lunak. Bandar Lampung: CV Keranjang Teknologi Media, 2023. [Online]. Available: https://ebook.kertekmedia.com/detailebook.php?title=Buku-Teks:-Analisis-Dan-Perancangan-Perangkat-Lunak

S. Ahdan and S. Setiawansyah, “Pengembangan Sistem Informasi Geografis Untuk Pendonor Darah Tetap di Bandar Lampung dengan Algoritma Dijkstra berbasis Android,” J. Sains dan Inform. Res. Sci. Inform., vol. 6, no. 2, pp. 67–77, 2020.

S. H. Hadad et al., “Student Ranking Based on Learning Assessment Using the Simplified PIPRECIA Method and CoCoSo Method,” J. Comput. Syst. Informatics, vol. 5, no. 1, 2023, doi: 10.47065/josyc.v5i1.4544.

N. Nuroji, “Penerapan Multi-Attribute Utility Theory (MAUT) Dalam Penentuan Pegawai Terbaik,” J. Ilm. Inform. dan Ilmu Komput., vol. 1, no. 2, pp. 46–53, 2022.

G. R. Putra, “Sistem Rekomendasi Pemilihan Smartphone Gaming Menggunakan Metode Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS),” J. Ilm. Comput. Sci., vol. 1, no. 1, pp. 41–48, 2022, doi: 10.58602/jics.v1i1.5.

R. R. Oprasto, “Sistem Pendukung Keputusan Pemilihan Pemasok Bahan Baku Menggunakan Metode PROMETHEE,” J. Media Celeb., vol. 1, no. 1, pp. 37–43, 2023.

M. Bakır, Ş. Akan, and E. Özdemir, “Regional aircraft selection with fuzzy PIPRECIA and fuzzy MARCOS: A case study of the Turkish airline industry,” Facta Univ. Ser. Mech. Eng., vol. 19, no. 3, pp. 423–445, 2021.

A. R. Mishra, D. K. Tripathi, F. Cavallaro, P. Rani, S. K. Nigam, and A. Mardani, “Assessment of battery energy storage systems using the intuitionistic fuzzy removal effects of criteria and the measurement of alternatives and ranking based on compromise solution method,” Energies, vol. 15, no. 20, p. 7782, 2022.

Ö. F. Görçün and G. Doğan, “Mobile crane selection in project logistics operations using Best and Worst Method (BWM) and fuzzy Measurement of Alternatives and Ranking according to COmpromise Solution (MARCOS),” Autom. Constr., vol. 147, p. 104729, 2023.

A. Puška, I. Stojanovic, A. Maksimovic, and N. Osmanovic, “Project management software evaluation by using the measurement of alternatives and ranking according to compromise solution (MARCOS) method,” Oper. Res. Eng. Sci. Theory Appl., vol. 3, no. 1, pp. 89–102, 2020.

I. Oktaria, “Kombinasi Metode Multi-Attribute Utility Theory (MAUT) dan Rank Order Centroid (ROC) dalam Pemilihan Kegiatan Ekstrakulikuler,” J. Ilm. Inform. dan Ilmu Komput., vol. 2, no. 1, pp. 1–11, 2023.

M. O. Esangbedo, J. Xue, S. Bai, and C. O. Esangbedo, “Relaxed Rank Order Centroid Weighting MCDM Method With Improved Grey Relational Analysis for Subcontractor Selection: Photothermal Power Station Construction,” IEEE Trans. Eng. Manag., 2022.

Setiawansyah, A. A. Aldino, P. Palupiningsih, G. F. Laxmi, E. D. Mega, and I. Septiana, “Determining Best Graduates Using TOPSIS with Surrogate Weighting Procedures Approach,” in 2023 International Conference on Networking, Electrical Engineering, Computer Science, and Technology (IConNECT), 2023, pp. 60–64. doi: 10.1109/IConNECT56593.2023.10327119.

W. M. Ardana, I. R. Wulandari, Y. Astuti, L. D. Farida, and W. Widayani, “Implementasi Metode SMART (Simple Multi Attribute Rating Technique) Pada Sistem Pendukung Keputusan Pemberian Kredit Pinjaman,” J. MEDIA Inform. BUDIDARMA, vol. 6, no. 3, pp. 1756–1766, 2022.

I. W. A. Wiguna, I. G. P. K. Juliharta, and N. W. Utami, “Model Aplikasi Sistem Pendukung Keputusan Pemberian Kredit Berbasis Web pada Koperasi Simpan Pinjam,” Jutisi J. Ilm. Tek. Inform. dan Sist. Inf., vol. 11, no. 1, pp. 97–108, 2022.

J. S. D. Raharjo, A. Afrizal, and U. Novitasari, “Sistem Pendukung Keputusan Pemberian Pinjaman Koperasi Menggunakan Metode AHP-TOPSIS,” J. Tren Bisnis Glob., vol. 1, no. 2, pp. 110–115, 2021.

D. Darwis, Y. Fernando, F. Trisnawati, D. H. Marzuki, and S. Setiawansyah, “COMPARISON OF EDGE DETECTION METHODS USING ROBERTS AND LAPLACIAN OPERATORS ON MANGO LEAF OBJECTS,” BAREKENG J. Ilmu Mat. dan Terap., vol. 17, no. 3, pp. 1815–1824, 2023, doi: 10.30598/barekengvol17iss3pp1815-1824.

S. Setiawansyah, “Kombinasi Pembobotan PIPRECIA-S dan Metode SAW dalam Pemilihan Ketua Organisasi Sekolah,” J. Ilm. Inform. dan Ilmu Komput., vol. 2, no. 1, pp. 32–40, 2023.

I. M. A. B. Saputra, “Penentuan Lokasi Stup Menggunakan Pembobotan Rank Order Centroid (ROC) dan Simple Additive Weighting (SAW),” J. Sist. Dan Inform., vol. 15, no. 1, pp. 48–53, 2020.

E. S. Nabila, R. Rahmawati, and T. Widiharih, “Implementasi Metode SAW dan WASPAS Dengan Pembobotan ROC Dalam Seleksi Penerimaan Peserta Didik BAru (Studi Kasus: Madrasah Tsanawiyah (MTs) Negeri Kisaran Kabupaten Asahan Provinsi Sumatera Utara Tahun Ajaran 2018/2019),” J. Gaussian, vol. 8, no. 4, pp. 428–438, 2019.

A. Abdulla, G. Baryannis, and I. Badi, “An integrated machine learning and MARCOS method for supplier evaluation and selection,” Decis. Anal. J., vol. 9, p. 100342, 2023.

J. Ali, “A q-rung orthopair fuzzy MARCOS method using novel score function and its application to solid waste management,” Appl. Intell., vol. 52, no. 8, pp. 8770–8792, 2022.

M. Stanković, Ž. Stević, D. K. Das, M. Subotić, and D. Pamučar, “A new fuzzy MARCOS method for road traffic risk analysis,” Mathematics, vol. 8, no. 3, p. 457, 2020.